1. K.T. Sunu Surendran, “Tribological performance of AZ91D/HfCp magnesium composite prepared through stir-ultrasonic-squeeze casting technique”, 1. K.T. Sunu Surendran A. Gnanavelbabu, “Tribological performance of AZ91D/HfCp magnesium composite prepared through stir-ultrasonic-squeeze casting technique”, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, (2022).
2. K.T. Sunu Surendran, “Identification of self-lubricative mode for the ultrasonic treated AA6061-B4C-CNT hybrid composites”, 2. K.T. Sunu Surendran A. Gnanavelbabu, “Identification of self-lubricative mode for the ultrasonic treated AA6061-B4C-CNT hybrid composites”, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, (2022).
3. K.T. Sunu Surendran, “Investigation on the tribocorrosion and electrochemical corrosion behaviour of AA2014/Al2O3 nanocomposites fabricated through ultrasonication coupled stir‐squeeze casting method”, 3. A. Gnanavelbabu, X. Jerish Amul, K.T. Sunu Surendran, “Investigation on the tribocorrosion and electrochemical corrosion behaviour of AA2014/Al2O3 nanocomposites fabricated through ultrasonication coupled stir‐squeeze casting method” Journal of Applied Electrochemistry, (2022) 52, 765–791.
4. K.T. Sunu Surendran, “Tribological behaviour of AZ91D/ultra-high-temperature ceramic composites at room and elevated temperatures”, 4. K.T. Sunu Surendran and A. Gnanavelbabu, “Tribological behaviour of AZ91D/ultra-high-temperature ceramic composites at room and elevated temperatures”,Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, (2022) 236(9), 1855-1870,
5. Shameena Banu P , Anju C.R, “Tweet Clustering Using Bisecting K-means”, International Journal of Innovative Research in Computer and Communication Engineering(IJIRCCE),Vol. 5, Issue 3, March 2017.
6. Salmath Amina K P, “Mining user-aware rare STPS and Frequent Events from Social Media”, International Journal of Computer Science Trends and Technology(IJCSTR),Volume 5,Issue 2-2017
7. K.T. Sunu Surendran, “Effect of ageing temperature on the corrosion behaviour of UHTC particulatesreinforced magnesium composites fabricated through ultrasonic assisted squeeze casting process”, 5. A. Gnanavelbabu, K.T. Sunu Surendran, P. Loganathan, “Effect of ageing temperature on the corrosion behaviour of UHTC particulatesreinforced magnesium composites fabricated through ultrasonic assisted squeezecasting process”, Journal of Alloys and Compounds, (2021), 856, 158173.
8. K.T. Sunu Surendran, “Process optimization and studies on mechanical characteristics of AA2014/Al2O3 nanocomposites fabricated through ultrasonication assisted stir-squeeze casting”, 6. A Gnanavelbabu, K.T. Sunu Surendran and S. Kumar, “Process optimization and studies on mechanical characteristics of AA2014/Al2O3 nanocomposites fabricated through ultrasonication assisted stir-squeeze casting”, International Journal of Metalcasting, (2021).
9. K.T. Sunu Surendran, “Influence of ultrasonicationpower on grain refinement, mechanical properties and wear behaviour ofAZ91D/nano-Al2O3 composites”, 7. A Gnanavelbabu, K.T. Sunu Surendran, S. Kumar,“Influence of ultrasonicationpower on grain refinement, mechanical properties and wear behaviour ofAZ91D/nano-Al2O3 composites”, Materials Research Express, (2020), 7, 016544.
10. K.T. Sunu Surendran, "A correlation with microstructure,”, K.T. Sunu Surendran and A. Gnanavelbabu, “Efficacy of ultrasonic treatment for dispersing nanoparticles: A correlation with microstructure,” Materials Today Proceedings, (2021)
11. K.T. Sunu Surendran, “Microstructure andmechanical properties of AZ91D/Al2O3 bimodal composite fabricated throughstir-ultrasonic-squeeze casting process,”, 9. K.T. Sunu Surendran, A. Gnanavelbabu and K. Rajkumar, “Microstructure andmechanical properties of AZ91D/Al2O3 bimodal composite fabricated throughstir-ultrasonic-squeeze casting process,”Materials Today Proceedings,(2021), 45(9),7822-7828. (Scopus).
12. K.T. Sunu Surendran, “Optimization of CO2laser cutting parameters for AA6061/B4C/hBN hybrid composites using taguchi-based response surface methodology”, 10. A. Gnanavelbabu, V. Arunachalam, K.T. Sunu Surendran, K. Rajkumar and E. Anandhababu, “Optimization of CO2laser cutting parameters for AA6061/B4C/hBN hybrid composites using taguchi-based response surface methodology”, Trends in Manufacturing and Engineering Management, Springer LNME (2021),111-122.
13. Fahida A K, “Anomaly Detection Scheme for Intelligent Transportation System using RNN-RBM Model”, International Research Journel of Engineering and Technology(IRJET),Volume 8,Issue 2,February 2021
14. K.T. Sunu Surendran, “Turning process characteristics of aluminium matrix hybrid composite using grey relational surface methodology” , 11. A. Gnanavelbabu, V. Arunachalam, K.T. Sunu Surendran, R. Saranraj and K. Rajkumar, “Turning process characteristics of aluminium matrix hybrid composite using grey relational surface methodology” Trends in Manufacturing and Engineering Management, Springer LNME(2021), 523-533.
15. Manujesh B J , Prajna M R , Sham Aan M P , Majida C V, , “ Flexural Characterization of Foam Cored E-Glass Reinforced Smart Materials Using Artificial Neural Network”, Materials Today: Proceedings,Volume 5,Issue 10,Part1,2018,Pages 21305-21313,October 2018 DOI:10.1016/j.matpr.2018.06.533
16. K.T. Sunu Surendran, “Optimization of laser trepanning parameters for mild steel by taguchi response surface methodology (T-RSM)”, 12. A. Gnanavelbabu, V. Arunachalam, K.T. Sunu Surendran, V.Dharaniya and K. Rajkumar,“Optimization of laser trepanning parameters for mild steel by taguchi response surface methodology (T-RSM)”,Trends in Manufacturing and Engineering Management, Springer LNME (2021), 905-914. https://doi.org/10.1007/978-981-15-4745-4_78
17. K.T. Sunu Surendran, “Optimization of machining parameters in CNC turning of AA6061-B4C-CNT hybrid composites using Grey-fuzzy method”, 13. A. Gnanavelbabu, V.Arunachalam, K.T. Sunu Surendran and K. Rajkumar,“Optimization of machining parameters in CNC turning of AA6061-B4C-CNT hybrid composites using Grey-fuzzy method”, IOP Conf. Series: Materials Science and Engineering (2020), 764, 012010. https://doi.org/10.1088/1757-899X/764/1/012010
18. K.T. Sunu Surendran , “Optimization of abrasive water jet machining parameters on AA6061/B4C/hBN hybrid composites using Grey-RSM”, 14. A. Gnanavelbabu, V.Arunachalam, K.T. Sunu Surendran and P.Saravanan, “Optimization of abrasive water jet machining parameters on AA6061/B4C/hBN hybrid composites using Grey-RSM”, IOP Conf. Series: Materials Science and Engineering (2020), 764, 012011.
19. K.T. Sunu Surendran , “Performance evaluation of abrasive water jet machining on AA6061-B4C-hBN hybrid composites using Taguchi methodology”, 15. A. Gnanavelbabu, K.T. Sunu Surendran and K. Rajkumar, “Performance evaluation of abrasive water jet machining on AA6061-B4C-hBN hybrid composites using Taguchi methodology”, Lecture Notes on Multidisciplinary Industrial Engineering, Springer, (2020), 651-660.
20. Prajul Raj, “Experimental Imvestigation on Mechanical and Morphological Properties of AA6061 reinforced with Silicon Carbide", Material Today:Proceedings,Volume 37,Part 2,2021,Pages 2041-2047
21. Pugazhenthi R., D. Sreeram, Clement Tom Scaria, G. Anbuchezhiyan, and P. Nanthakumar., "Effect of process parameters on machining of Al-TiC metal matrix composites using RSM.", Materials Today: Proceedings 46 (2021): 3282-3287.
22. Clement Tom Scaria, and R. Pugazhenthi., Effect of process parameter on synthesizing of TiC reinforced Al7075 aluminium alloy nano composites." , Materials Today: Proceedings 37 (2021): 1978-1981.
23. Clement Tom Scaria, and Jenson Joseph E. , "Optimization of Transportation Route for a Milk Dairy." , International Journal of Engineering Research & Technology 3.11 (2014): 854-859.
24. Clement Tom Scaria, and Alvin Thariyath. , "Usage of alternative fuel in a boiler for cost reduction in a chemical industry." , International Journal of Scientific and Research Publications 4.3 (2014): 1-4.
25. Sanoop Sebastian; Vijayananth Suyamburaja, R.Kumar. , "Synthesis, processing and finite element analysis of CNT based polymer composites'', AIP Conference Proceedings.
26. Sanoop Sebastian; Vijayananth Suyamburajan,, "Microstructural Analysis of Diffusion Bonding on Copper Stainless Steel", Materialstoday:Proceedings. Volume 37, Part 2, 2021
27. Kalaiselvan K, Elango A & Nagarajan, NM 2016, ‘Studies of hardness distribution inTi/Al dissimilar metal joints using laser beam welding', International Journal ofAdvanced Engineering Technology, ISSN: 0976- 3945, vol.VII/IssueI/Jan-March, pp.117-120.
28. Kalaiselvan K,Elango A & Nagarajan, NM 2016, ‘Evaluation of strength and fracturemode along weldment of Ti/Al sheet metal joint using laser beam welding', InternationalJournal of Advanced Engineering Technology, ISSN: 0976- 3945, vol. VII/Issue I/Jan-March, pp. 15-18.
29. Kalaiselvan K, Elango A & Nagarajan, NM 2016, ‘Crack and surface morphology ondissimilar metal butt joints using laser beam welding &39;, Journal of ManufacturingTechnology Research, Nova Science Publishers, ISSN: 1943-8095, Inc. vol. 7, no. 3-4.
30. Kalaiselvan K, Elango A, & Nagarajan, NM 2016, ‘SEM studies on age hardenedLaser welded dissimilar Ti/Al sheet metal weldments', International Journal of Innovationand Scientific Research, ISSN: 2351-8014, vol. 21, no. 2 Apr, pp. 310-320.
31. Kalaiselvan K, Elango A & Nagarajan, NM 2016, ‘Studies on weldment structure inTi/Al dissimilar metal joints using Laser beam welding&39;, International Journal ofInnovation and Scientific Research, ISSN: 2351-8014, vol. 21, no. 2, Apr, pp. 301-309.
32. Kalaiselvan K, Elango A & Nagarajan, NM 2017, ‘Fracture behavior and Interfacemicrostructure studies on Ti/Al sheet metal joint using Laser beam welding ', , AsianJournal of Research in Social Sciences and Humanities, ISSN:2249-7315, V-ol.7. pp.438-448.
33. Kalaiselvan K, Elango A, Nagarajan NM & Sekar, K 2017, ‘Studies on characteristicsof Ti6Al4V/AA2024 dissimilar weld joint using laser beam focusing from AA2024 side’, Transaction of the Indian Institute of Metals, (Springer), ISSN:DOI: 10.1007/s12666-017-1036-7.
34. Kalaiselvan K, Elango A & Nagarajan, NM 2017 ‘Microstructure and EDS analysis onTitanium/Aluminium dissimilar laser welded joint subjected to age hardening’, IndianJournal of Engineering & Materials Sciences, CSIR-NISCAIR. Vol.23, pp.377-382.
35. Kalaiselvan K, Elango A & Nagarajan, NM 2017, ‘Weld speed effects on quality ofTi/Al dissimilar metal joints using Laser beam welding’, International Journal ofAdditive and Subtractive Materials Manufacturing, ISSN: 2057-4983, Inderscience,Vol.1, no.1pp.47-66.
36. Kalaiselvan K, Elango A,Nagarajan NM, Sekar K & Mathiazhagan, , N 2017, ‘Studieson Interlayer Characteristics of Ti/Al Dissimilar Metal Joints Using Laser Beam’, Journalof Manufacturing Technology Research, Nova Science Publishers, ISSN: 1943-8095, vol9, Issue 1-2.
37. Kalaiselvan K, Elango A,Nagarajan NM & Sekar, , K 2017, ‘Weldability of Ti/Aldissimilar sheet metal joints using Nd: YAG Pulsed laser’, International Journal ofMaterials, NAUN.org Journals, ISSN: 2313-0555, vol. 4, pp.31-35.
38. Kalaiselvan K, Elango A,Nagarajan NM, Sekar K & Mathiazhagan, N 2018, ‘Effectof heat treatment on mechanical properties and microstructure of Ti/Al sheet metal jointusing laser beam welding’, International Journal of Additive and Subtractive MaterialsManufacturing, ISSN: 2057-4983, Inderscience, Vol.2. no 1, pp 13-24.
39. Kalaiselvan K, Elango A,Nagarajan NM & Sekar, K, 2018, ‘Before and after Heat Treatment on Weldment of Ti/Al Laser Beam Dissimilar Joints’, Journal of Machining and Forming Technologies Research, Nova Science Publishers, Vol. 9, Issue 1-2.
40. Kalaiselvan K, Elango A, Nagarajan NM, Mathiazhagan N & VigneshKannan, 2018,‘Studies on weldment performance of Ti/Al dissimilar sheet metal joints using laser beam welding’, Coupled Systems Mechanics, Techno-Press, ISSN:2234-2184,.
41. Kalaiselvan K, Elango A,Nagarajan NM& Sekar, K 2018, ‘Experimental investigation on mechanical and distortion characteristics of Ti/Al dissimilar metal joint using laser beam welding’, Journal of Advanced Manufacturing System, World Scientific Publishers,Vol.17. no 4, pp. 569-579.
42. Kalaiselvan K, Elango A, Nagarajan NM & Sekar, K 2018, ‘Influence of LBW parameters on properties of Ti6Al4V/AA2024 dissimilar alloy joint’, Indian Journal of Engineering & Materials Sciences, CSIR-NISCAIR. Vol.25, pp.445-449.
43. Kalaiselvan K, Sekar K & Elavarasi, S2021, ‘A Review on Process Parameters of Ti/Al Dissimilar Joint Using Laser Beam Welding’, International Journal of Mechanical and Materials Engineering, World Academy of Science, Engineering and Technology,Vol:15, No:6. pp. 255-262.
44. Kalaiselvan K, Sekar K Mathiazhagan N & Elavarasi, S 2021, ‘Effect of AW and PWHT on Properties of Laser Beam Welded Ti/Al Dissimilar Joint’, Journal of Manufacturing Technology Research, Nova Science Publishers, Vol. 13, Issue 3-4.
